Disconnect the second WiFi antenna from the motherboard and unplug the antenna from the metal panel (marked in red). Turning off the fan loop (marked by green). Unscrew 30 screws on the metal panel (marked by yellow circles). Turn over the game console and turn off all cables from the motherboard. Step-10ĭisconnect the cable from the power supply and remove the Wi-Fi antenna from the PS4 Slim motherboard. After that, lift up the power supply with your fingers. Use a plastic opening tool to make space between the power supply and case. After, disconnect the Wi-Fi antenna from the power supply. Remove the three screws with a PH0 screwdriver. Next, using T8 Torx screwdriver unscrew three screws and remove the metal panel. The next step is to remove the power supply of the PS4 slim. It is easy just pry up on the two corners of case with your fingers.
Turn over the PlayStation 4 Slim and remove the top cover. For this pry up on the two corners of case with your fingers. Now you can open the bottom case of the ps4 slim. Step-4Īfter, unscrew one screw that was behind the sticker by use T8 Torx screwdriver. The next step is to remove the warranty sticker. Next, unscrew the one screw and removing the hard drive. Remove the panel, it is removed by a slight movement to the side. The first step is to remove the hard drive disk. Steps of disassembly of the photo instructions are not clear, you can watch the PS4 Slim model location: turn the console over and at the end where the HDMI output is located, your revision of the console will be indicated a little higher in the recess.Īt the end of the page, you will find a video instruction on the reverse assembly of the PS4 Slim.įor disassemble the PS4 Slim, you need two type of screwdrivers: Torx T8 and Phillips PH0. In addition, we will clean fan from dust and replace the thermal paste.
How to disassemble the PlayStation 4 Slim game console model like CUH-2015 or CUH-2115 and other revisions.
0 kommentar(er)
